Skip to main content

Licensed & insured · Serving MA, Southern NH & Southern ME

Ryan Gath Electric

New circuits & installs

Electrical Installation for Homes in Westford & Newton

New circuits, dedicated lines for big appliances, outdoor outlets, garage power and fixtures. Planned properly, permitted, and finished so it looks like it was always there.
Request free estimate(978) 569-4775
  • Licensed & insured
  • Free estimates
  • Warranty-backed work

Electrical Installation

Adding power the right way.

Houses rarely stay the way they were built. You finish the basement, add a mini-split, put a freezer in the garage, build a home office, or finally want an outlet on the deck. Each of those needs power, and the shortcut of tapping into whatever circuit is closest is how overloaded circuits and nuisance trips start.

We plan installations from the panel out: which new circuits you need, what size, where they’ll run and what protection each one requires. Then we install them cleanly, with boxes where boxes belong and cable secured and protected, not draped across the basement ceiling.

Installation work ranges from a single dedicated circuit for a microwave to wiring a whole basement suite. Whatever the size, it’s permitted, inspected where required, and backed by our warranty.

“Ryan Gath Electric helped us install a 220 line from our house to patio to hook up a pool heater. Ryan came to our house for a quote and was respectful of our needs. He genuinely cared about making sure we were getting the best value.”
Andrew M. · Customer review

Signs to watch for

Common installation projects.

  • 01

    Dedicated appliance circuits

    Microwaves, dishwashers, disposals, freezers and wine fridges often need their own circuits to run without tripping.

  • 02

    Garage and workshop power

    More outlets, 240-volt circuits for tools or compressors, and better lighting for the space.

  • 03

    Outdoor outlets and power

    Weather-resistant GFCI outlets for decks, patios, holiday lighting and yard tools.

  • 04

    Finished basements and additions

    Full circuit layouts for new living space, including lighting, outlets and smoke detection.

  • 05

    Home offices

    Enough outlets in the right places, dedicated circuits for equipment, and lighting you can work under.

  • 06

    Mini-splits and equipment

    Circuits and disconnects for HVAC equipment, water heaters, well pumps and more.

What the job involves

From plan to power.

  1. 1

    Walk the space

    We talk through how you’ll use it and what you plan to plug in, now and later.

  2. 2

    Plan circuits and routes

    We size circuits, check panel capacity, and plan the cleanest cable routes.

  3. 3

    Estimate and permit

    Written price, then we file the permit with your town.

  4. 4

    Install

    Boxes, cable, devices and fixtures installed to code, with protection where required.

  5. 5

    Inspect and finish

    Inspection as required, final testing, and a walkthrough of what’s new.

Good to know

Good to know before adding circuits.

Think a few years ahead. If a finished basement, a hot tub or an EV might be on the horizon, tell us now. Running an extra circuit or leaving panel space while the walls are open or the panel cover is off is far cheaper than coming back later.

Outdoor and garage outlets need specific protection. Outdoor receptacles call for GFCI protection and weather-resistant, in-use covers that stay closed with a cord plugged in. Garage outlets usually need GFCI protection too. We install the right devices for each location so they pass inspection and stay safe.

Appliance instructions matter. Many large appliances list their circuit requirements in the installation manual, and inspectors check against them. Keep the manual handy or send us the model number and we’ll confirm the circuit before install day.

Why it matters

Done once, done right.

A properly planned circuit runs for decades without you thinking about it. A tapped-in shortcut trips at the worst moments and can overheat. Getting it right the first time is always cheaper than fixing it later.

Clean installs also matter for resale. Permitted work with tidy runs and labeled breakers tells a buyer’s inspector the house was cared for.

  • Circuits sized to the load
  • Panel capacity checked
  • Permitted and inspected
  • Clean, finished look
Modern kitchen with cove lighting and recessed cans
Basement wet bar with black pendants beside a media room
USB combination outlet with a bronze plate set into a granite backsplash

Electrical Installation FAQ

Questions we get about this work

Do I need a new circuit for my appliance?

Many large appliances call for a dedicated circuit, and the manufacturer’s instructions usually say so. We’ll check the requirements and your existing wiring.

Can you add outlets without opening walls?

Often, yes, by fishing cable from the basement or attic. Where some opening is needed, we keep it small.

Is there room in my panel?

We check during the estimate. If it’s full, we’ll explain the options, from rearranging circuits to a panel upgrade.

Do you install fixtures I bought?

Yes. Let us know what you have and we’ll confirm it’s suitable for the location and box.

Related services

Often done together.

Nearby service areas

Electrical Installation across the region.

Full service area

Free estimates · Financing · Warranty

Ready to talk electrical installation?

Call Monday to Friday, 8:00 to 4:30, or send a note and we’ll get back to you with a time for your free estimate.

Request service(978) 569-4775
Call now Free estimate